Glass Fixer Windshield Repair Kit

  • $14.99
  • Save $15.00


Repair your cracked windshield in just a few minutes with our Glass Fixer. The DIY windshield repair kit comes with everything you need to fill and repair small cracks or chips in your car's windshield. It's quick, easy, and reliable. Your car will look good as new in no time!

 

FEATURES:
  • DIY windshield repair kit
  • Set includes: resin, repair device, curing strips, razor blade, and instructions
  • Minimizes appearance of cracks and/or chips
  • Prevents damage from running and spreading
  • Easy to use
  • Takes only about 20 minutes to fix
INSTRUCTIONS (for cracks):
  1. Slowly dispense resin into crack, moving from one end to the other at about 3 seconds per centimeter
  2. Wait about 5-10 minutes and check to see if air is trapped in crack
  3. If air is trapped, very gently apply a small amount of pressure to both sides and center of crack from inside the windshield to force air out
  4. Dispense more resin into crack to fill emptied air pockets if necessary
  5. Cover crack with curing strips
  6. Make sure windshield is in direct sunlight and allow to cure for 5-10 minutes
  7. Once cured, remove curing strips and scrape off excess resin with razor blade
INSTRUCTIONS (for chips, bullseyes, and starburst damage):
  1. Scrape off loose glass fragments with razor blade
  2. Affix applicator base to windshield around crack with suction cups making sure ring is centered above the break
  3. Screw the resin chamber into the center ring flattening the rubber mouth to windshield gently and completely
  4. Squeeze 3-6 drops of resin (depending on extent of damage) into the resin chamber
  5. Screw pressure driver clockwise into resin chamber and drive resin into break
  6. Wait about 4-6 minutes for repair resin to absorb into break (if resin has not reached all areas of break, apply heat with a hot air gun to inside of windshield to help spread the resin)
  7. Unscrew and remove pressure driver to release any trapped air
  8. Reapply pressure driver and repeat step 4-6 to fill air holes
  9. Remove applicator and add a drop of resin onto areas where damage is still visible
  10. Cover area with curing strip (no pressure necessary)
  11. Make sure windshield is in direct sunlight and allow to cure for 5-10 minutes
  12. Remove curing strip and scrape off any excess resin
FREE WORLDWIDE SHIPPING!
  • Please allow 2-4 weeks for delivery to the United States, Canada, United Kingdom, Australia, New Zealand and all European Union Countries.
  • Please allow 2-6 weeks for delivery to the rest of the world.